BLOG

Sales of Changan minicar,Changan car, Changan Kaicene, Changan Oshan, Wuling, Baojun, Dongfeng Sokon, Dongfeng Fencon, BAIC Wevan, BAIC Hyosow and other series of car accessories


18

2021-10

The wipers always leave streaks?

Author:

Source:


If your windshield wipers have not been used for a few years and are already not cleaning properly, it may be because there is an oil film on your windows. The oil film mainly comes from the oil mist emitted by the car, which gradually adsorbs on the windshield during normal driving and becomes difficult to remove after long-term high-temperature oxidation. Due to the mutual repulsion between oil and water, irregular water stains and foggy surfaces are easily formed on the glass. In this case, you should purchase a special cleaner with strong cleaning ability to wipe the glass.
When it comes to maintaining car wipers, the most important thing is to pay attention to cleaning fine sand. Wipers with fine sand on them can easily damage the smoothness of the rubber strip, resulting in the phenomenon where rainwater cannot be wiped clean after long-term use. Therefore, every time you wash your car, you should pay attention to cleaning the fine sand on the wipers. Additionally, in summer, try not to expose them to sunlight when parking, as rubber products are most afraid of direct ultraviolet rays and are prone to aging and hardening.
If you find that the wipers are not clean, it is mostly due to rough rubber strips caused by improper maintenance of the wipers. In fact, the rubber strips do not age or harden. As long as you find a way to smooth the rough rubber strips, you can maintain them according to the following methods:
1. Remove the two wipers
2. Prepare a piece of wet sandpaper
2000 grit sandpaper can be purchased at a paint store. Tear the wet sandpaper into small pieces, one piece at a time is enough.
3. Soak the wipers and wet sandpaper in clean water
4. Use the wet sandpaper to polish the rubber strips of the wipers
Please note that when grinding the rubber strips, both the side and the front surface should be considered. Control the polishing time for each side to about 5 minutes; it does not need to be very long.
Basic daily operations and maintenance of the wipers:
1. Windshield washer fluid should not be replaced with tap water;
2. When there is water on the glass surface, be sure to use the wipers to avoid dry wiping that can damage the rubber strips.
3. When the vehicle is parked for a long time or in extreme weather, please lift the wiper arms.

Auto Parts

Kuanzheng

Latest developments

2021-10-18

The wipers always leave streaks?

If your windshield wipers have not been used for a few years and are already not cleaning propeThe oil film mainly comes from the oil mist emitted by the car, which gradually adsorbs on the windshield during normal driving and becomes difficult to remove after long-term high-temperature oxidation. rly, it may be because there is an oil film on your windows.

2021-10-18

Why does the car clutch become low?

1. There is air in the clutch system, or there is a leak in the clutch master cylinder or slave cylinder; 2. The clutch cable is low, and there is an adjustment screw at the front end of the clutch cable.

2021-10-18

Considerations for Automotive Dashboard Mold Design

The dashboard is a very unique component in a car, combining safety, functionality, comfort, and aesthetics. In addition to requiring good rigidity and energy absorption, people's demands for its tactile feel, texture, color, and tone are also increasing.

2021-10-18

Classification of car sunroofs

1. Inbuilt Sunroof The inbuilt sunroof refers to a sunroof where the sliding assembly is placed between the interior and the roof of the car. The advantage is that the sunroof opening is large, and the design is simple and aesthetically pleasing.